Home / Calculators / Pipe Offset Calculator
Take up the offset between two parallel pipe runs with two elbows. Enter the offset, the elbow angle and the pipe size. The tool gives the cut length of the travel piece, where the elbows go and the run distance. If the line shifts both sideways and up, use the "Rolling" option.
View. Orange: elbows. Dark: welds. The dashed line is the pipe axis.
End view. True offset and the elbow roll angle.
For the same offset and elbow type. The multiplier is the factor fitters know by heart: travel = offset × multiplier. A red value means the elbows do not fit at this angle.
Get the elbows for this offset from us
We manufacture elbows at any angle from DN15 to DN6000. Copy the dimensions and send them for a quote:
yazici@yaziciendustri.com · +90 212 664 66 43
Elbow centre-to-end dimensions are calculated as R × tan(angle/2) and agree with ASME B16.9 / EN 10253 standard elbows to within a few millimetres. Check the centre-to-end dimension of your actual elbow before cutting. In marine work, the layout follows the approved project and class rules.
Send us the list from the calculator; we will quote flanges, elbows, tees, reducers, pipes and valves in a single offer, with EN 10204 3.1 material certificates.
This calculator is used in these sectors: Shipyard. All calculators →
Results are for preliminary selection and do not replace engineering design. Ask our technical team for the final selection.
